T-Splines
T-Splines

Current version

Download the current version.

Autodesk T-Splines Plug-in for Rhino: v4.0 Download

Featured threads

The links below lead to some of our favorite forum threads.

052775 052099

29164 052640

29164 29164

052346 052775


See more featured threads.

Webinars

Date Topics  
7/09 Creating stunning jewelry designs with T-Splines View
5/07 How to approach modeling with T-Splines View
3/07 Carl Bass reintroduces T-Splines for Rhino View
6/21 Transitioning from NURBS to T-Splines View
12/07 Footwear modeling with T-Splines 3.3 for Rhino View
11/29 New T-Splines reverse engineering tools View
10/28 How T-Splines changed my aproach to making jewelry in CAD View
09/29 Modeling a water gun View
09/07 Car modeling:
Parts 1, 2, & 3
View
07/06 tsElements intro
hosted by Novedge
View
06/22 Free-form Architecture View
06/15 TS Pipe command View
06/08 T-Splines for Rhino intro View

Chris's Stuff.

Share your T-spline images here.

Re: Chris's Stuff.

Postby e30andrew » Thu Aug 18, 2011 2:29 pm

wow, theres some amazing stuff in this thread Chris, i tip my hat to you good sir.
User avatar
e30andrew
Poster
 
Posts: 12
Joined: Thu Jul 28, 2011 11:07 am
Location: Davenport, IA

Re: Chris's Stuff.

Postby Chris Botha » Thu Aug 18, 2011 5:50 pm

Thanks :)

i try hard..

.. actually my wife says im very trying...

;)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Aug 22, 2011 4:34 am

a clip I did for community at 3dcadjewelry.

TSplines TsPipe crossover ring. Quick and dirty.. At the developers, is it just me or is selecting edge loops much harder to do now?

updated blog too

http://digital-jeweller.blogspot.com/

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Adam Helps » Tue Aug 23, 2011 4:38 pm

Chris Botha wrote:Quick and dirty.. At the developers, is it just me or is selecting edge loops much harder to do now?


I don't know, it's possible we broke something. I'll note, though, that there are probably five or six ways to select an edge loop -- are you referring to double-clicking? That seems like the easiest one to break. If you have some model where it seems inconsistent, we'd love to play with it.
User avatar
Adam Helps
Employee
 
Posts: 560
Joined: Thu May 26, 2005 2:15 pm
Location: Provo, Utah

Re: Chris's Stuff.

Postby Chris Botha » Tue Aug 23, 2011 6:54 pm

Hey Adam, Ya I dbl click, usually it worked really well, but it seem sto be on off now, sometimes it works sometimes it does'nt. I have not played much in Tsplines since the update, maybe 3 or four models so not a biggy for me. Just noticed it in that model in paticular, you will probably see, every now and then it works great, other times i can dbl click as much as i like to no effect.. just wierd...
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Aug 28, 2011 9:28 pm

To the Aussies (and anyone else) thast interested, I scanned the article from the Australian Jeweller Magazine, about cad/cam, the article features the Tsplines cross. the images didnt get the annotations I supplied unfortunately, but it think its apparent that its a Tsplines piece.

(easier to read on Blog I think due to better formatting)

http://digital-jeweller.blogspot.com/20 ... eller.html

Image
Image
Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Sep 18, 2011 4:31 am

hey folks, been a while since i posted, been busy, this was a quick clip for a Facebook group, hope you enjoy :)

(soundtrack thanks to David Parry, all rights reserved)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Tue Sep 27, 2011 11:52 am

Hi Chris, I have been re-reading all this topic and I have to say that all the info here is priceless! The quantity and quality of all these projects and models is stunning.
I love how you show us all the manufacturing process. You could write a jewelry book with all these,... and a really good one!
Thank you so much for sharing this.
JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Wed Sep 28, 2011 1:38 am

Hey dude, thanks, coming from you, who I hold to be "king of the hill" it's a rare compliment.

I have been pretty busy, ramping into christmas, and not much by way of splines but hope to start posting again soon :)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Oct 16, 2011 3:58 pm

bit od splines on the weekend.. been a while was nice to play again :)
Capture.JPG

Capture2.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Mon Oct 17, 2011 8:30 am

That's a nice ring design.
Hope it makes it to the real world.
JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Mon Oct 17, 2011 2:25 pm

Hi Juan, it will, it's also getting pave diamonds above the head area, but for a client in Israel and a copy of an existing piece, this will be dual colors, half white, half yellow with a black pearl, 10% different to the original, you know, the rules of copyright ;)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Oct 25, 2011 3:38 am

i refined this model somewhat for the upcoming webinar, I will make the model available to users that have registered. (in its tsplines version, and its nurbs pave set version)

Hope to see some of you on saturday in the wee early hours of my morning ;)


https://www1.gotomeeting.com/register/686428144

regards
Chris

Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Tue Oct 25, 2011 7:22 am

Great! I'll be there ;-)
JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby knead » Fri Oct 28, 2011 4:04 am

Sat, Oct 29, 2011 6:00 AM - 7:00 AM (GMT +09:00): SEOUL
However... Like other Webinars, To join this webinar I will not sleep. 8)
User avatar
knead
Poster
 
Posts: 463
Joined: Fri Dec 14, 2007 10:07 am
Location: Seoul, Republic of Korea

Re: Chris's Stuff.

Postby Chris Botha » Fri Oct 28, 2011 2:29 pm

2011-10-29 06-54-38.389 (2).jpg
not to worry.. I am dressed for the occasion myself!


live in a half hour or so i think ;)

(dont mind admitting im pretty nervous ;) )
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Fri Oct 28, 2011 5:03 pm

whewwwwwwwwwwwww..... that was intense.... Enjoyed that, thansk so much guys :)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sat Oct 29, 2011 7:14 pm

i believe a girl once opened a box and found a pod...
nice quick easy tsplines job.

pod.jpg
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Oct 30, 2011 12:13 am

matching triple ringset added.. flow command wooohoooo

tripod.jpg
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Oct 30, 2011 2:30 pm

TSQuadPlane FTW!

(i was bored... sunday night.. what can i say!.. I hate you guys for making me play with the splines again. its like drugs!)

Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Matt Sederberg » Thu Nov 03, 2011 9:48 am

Here's a recording of the webinar that Chris put on with us last week. Thanks again, Chris!

User avatar
Matt Sederberg
Employee
 
Posts: 1541
Joined: Wed Jul 13, 2005 11:27 am
Location: Provo, UT

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 03, 2011 1:17 pm

thank you guys for having me, i only realised once i saw the clip how far we overshot the time! its true, time does fly when you are having fun!
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 03, 2011 4:38 pm

Guys, I am getting lots of nice feedback, thanks. One of the biggest requests is the toolbar setup I'm using, many of you tried to copy it but have issues with copied flyout menu's not working right, for you guys here is a clip.

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 09, 2011 8:19 pm

another look into production.. sneak peak as it were.. only the head section is tsplines, but i twas so much easier to make those flutes in tsplines...

design
Capture.JPG


milled wax
IMG_1835.JPG
IMG_1835.JPG (23.82 KiB) Viewed 350279 times


casts
IMG_1869.JPG
IMG_1869.JPG (55.36 KiB) Viewed 350279 times


cleaned up.
IMG_1870.JPG
IMG_1870.JPG (53.66 KiB) Viewed 350279 times


assembled
IMG_1874.JPG
IMG_1874.JPG (35.92 KiB) Viewed 350279 times

IMG_1873.JPG
IMG_1873.JPG (30.19 KiB) Viewed 350279 times



set images next week if i see it.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Nov 15, 2011 10:07 pm

had some strange ones lately....
Capture3.JPG

Capture.JPG
Capture.JPG (70.69 KiB) Viewed 350208 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby hamed.tba » Wed Nov 16, 2011 4:36 am

you are my hero in working on jewelery by TS man .
fantastic works .
i really like the pictures of process
User avatar
hamed.tba
Poster
 
Posts: 57
Joined: Sat Sep 25, 2010 6:59 am
Location: Iran-Mashhad

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 16, 2011 3:12 pm

hanks man, i dont have much time to do "process" pictures anymore, believe it or not i am averaging about 5 rings a day now, so my eyes and brain are fried... happily i only do 1 or two a week that i have to finish myself, the rest are outside jewellers so cad only.. getting lazy and fat...

[edit] had a query about why the top pic is soft and the bottom is more mechanical, i could explian about inserting edge loops but a model woudl explain it better, i lost original after converting to tsplines, but knocked up another one quick. process = sweep2 with an inner and outter rail, using a degree3 single closed curve, then tsconvert and merge some faces, then insert edges. hope its usefull.
Attachments
shank.3dm
(643.36 KiB) Downloaded 1824 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 16, 2011 10:51 pm

here is that tube ring thingo..

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Thu Nov 17, 2011 7:51 am

Nice!
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 17, 2011 6:51 pm

and the other one off to casting, my wife mills all my stuff.. i love her, makes my life so easy.. draw, email, done!

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Nov 21, 2011 6:39 pm

quick in an out heart pendant...
tsheart.JPG
tsheart.JPG (66.12 KiB) Viewed 350049 times

106 dias.JPG
106 dias.JPG (78.88 KiB) Viewed 350049 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Nov 22, 2011 9:43 pm

something a bit different! signet ring bits and bobs.

take this
Capture.JPG


to make a signet
fuckaduck (Custom).jpg
fuckaduck (Custom).jpg (26 KiB) Viewed 350014 times


and .. done.. phewiee.
garry cap (Custom).JPG
garry cap (Custom).JPG (59.16 KiB) Viewed 350011 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 23, 2011 5:21 pm

this model cleaned up and avaialble in gold members section of 3dcad, i know we share quite a few users, just thought I would drop a line here :)

deer (Custom).JPG
deer (Custom).JPG (33.02 KiB) Viewed 349985 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 24, 2011 1:56 am

and cut..

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 24, 2011 8:42 pm

that shanky type spliney jobby, off to setting, hope someone finds the process interesting ;)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 30, 2011 3:48 pm

curve
pipe
explode
tsconvert
tsinsert edge simple
10 minutes of poke and prod.

gotta love them splines ;)

love splinjes.JPG
love splinjes.JPG (41.4 KiB) Viewed 349833 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Nov 30, 2011 4:02 pm

if you wondering why pipe and tsconvert its because i needed more points than tspipe gives. faster than inderting multiple edges/
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Dec 01, 2011 9:46 pm

some rubies into thsi then its done, wont see it again :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Dec 04, 2011 7:29 pm

a.. when a sweep just wont get you there... good ol splines ;)
spliner.jpg


to make this

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby hamed.tba » Tue Dec 06, 2011 4:07 pm

Chris Botha wrote:some rubies into thsi then its done, wont see it again :)



that was really cool man .
if client want to fight and hit a shot on some body head it will be copy pasted on his head :))

all your works are really perfect
i check this gallery almost every day ;)
User avatar
hamed.tba
Poster
 
Posts: 57
Joined: Sat Sep 25, 2010 6:59 am
Location: Iran-Mashhad

Re: Chris's Stuff.

Postby Chris Botha » Wed Dec 07, 2011 2:23 am

thank you appreciated,

and uhhh psssst, making impressios is what this ring is about ;)

http://digital-jeweller.blogspot.com/20 ... -ring.html

Designed as a joke but is actually selling pretty well :)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Dec 11, 2011 3:41 pm

interesting one, and the shape of heart was flexible, so being able to tilt it in Tsplines was handy :)

16 year anniversary, so 16 diamonds, and the two kids names , and the heart of love from him to her..

cap2 (Small).JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Dec 11, 2011 3:54 pm

watch this space, potential tsplines client, requested some help to complete a model, I use this oppertunity to show the old way, surface modelling, to get her over her immediate hurdle, but will do the followup video of the tsplines method after she gets her copy (in her xmas wishlist)


380384_242438515822265_100001683553250_622726_1956063744_n.jpg


irksome huh????

lol watch this space for tsplines version.. which i estimate to take about 3 to 5 minutes to complete.. ;)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Dec 11, 2011 7:26 pm

some days i like T-Splines, other days I ask myself, "how the hell did i live without it.. "

top.jpg
persp.jpg
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Dec 12, 2011 10:22 pm

Sorry i dont get to post too many renders, im too bust making stuff ;)

the heart is on its way!

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Dec 14, 2011 1:32 am

ehhhhh... duno what it is, siamese summing or the other.. his and hers matching set of pendants.. thank the lord for cad...

will need to click on it to see, forum is not autosizing.

Capture.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Dec 20, 2011 1:30 am

came up nicely..



Tsplines actually did make someones life better today ;)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Tue Dec 20, 2011 7:17 am

Chris Botha wrote:came up nicely..

Came up veryy nicely...
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Wed Jan 04, 2012 10:10 pm

ug these up, forgot i did them some time ago :)
Capture.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Jan 10, 2012 3:12 am

an intersting one.. :tsAppend: and bobs your aunty..

both for me.. the tattoo and the ring!

302613_215916831807767_100001683553250_553912_208679591_n.jpg
302613_215916831807767_100001683553250_553912_208679591_n.jpg (27.65 KiB) Viewed 348833 times
step2.jpg
edge.jpg
top.jpg
bottom.jpg
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Matt Sederberg » Tue Jan 10, 2012 1:05 pm

Chris Botha wrote:an intersting one.. :tsAppend: and bobs your aunty..

both for me.. the tattoo and the ring!

302613_215916831807767_100001683553250_553912_208679591_n.jpg
step2.jpg
edge.jpg
top.jpg
bottom.jpg


Nice one Chris. Good time to use tsAppend :tsAppend: . This is the type of thing that many beginner users think should be a push-button in T-Splines. I guess it is relatively straightforward but you need to lay out your faces the right way. Good work.
User avatar
Matt Sederberg
Employee
 
Posts: 1541
Joined: Wed Jul 13, 2005 11:27 am
Location: Provo, UT

Re: Chris's Stuff.

Postby Chris Botha » Tue Jan 10, 2012 5:58 pm

I initially used tspipe for almost everything, simply because it was easier, but you are correct... tsappend used correctly is far more powerful, better control over fine areas..
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Jan 12, 2012 1:55 pm

My next TS project! New body shell in foam for my Drone. will fibreline the shell after. adding some mechanical fitting areas for GoPro HD cam etc.. This job is screaming for TSplines ! :)

the existing outside shell is like so



sketched out a few ideas will model next week.. happily it just just just fits on my cnc..
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Thu Jan 12, 2012 3:46 pm

Fun project!

Does the Drone can hold a GoPro camara? (weight)

JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Thu Jan 12, 2012 4:30 pm

eap, can hold around 110gr.. so need to dump the external fixturing system and add a locating thread instead... quite a fe wof them around but all work on adding more weight to existing frame, I plan to reduce weight of frame, increase strength and leave more room for the 2600MAH (orig = 1000mah) battery AND the Go Pro.. at current its not possible to have both and orioginal battery only = 10 minutes flight time.. so i want to make a construct that i can build a "skeleton" around, fibleglass, carbon fibre the construct and add mounting points..

the AR Drone 2 apparently features GPS tracking too.. I wont buy one tho.. it was hard enough convincing the wife that this was legitimate research...

also you need to be carefull because you can kiss your drone (300 bucks) and camera (300bucks) goodbye quite easily in the wind.. so think extra weight will actualy help handling, less nimble but more stability..

so this doenst happen ;)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Jan 12, 2012 4:34 pm

xcuse the language.. i was NOT happy... ;)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Thu Jan 12, 2012 5:27 pm

Chris Botha wrote:.. it was hard enough convincing the wife that this was legitimate research...

heheh :lol: It is a very legit research. Top tech stuff.

Chris Botha wrote:also you need to be carefull because you can kiss your drone (300 bucks) and camera (300bucks) goodbye quite easily in the wind.. so think extra weight will actualy help handling, less nimble but more stability..

Yeah, I think that the extra weight will help stability. And will make video much more steady.

lol, it seems that you have always the right tool for each job. "Stuff to take things down of a tree"
Very funny...
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Fri Jan 13, 2012 1:39 am

Chris Botha wrote:some days i like T-Splines, other days I ask myself, "how the hell did i live without it.. "

top.jpg
persp.jpg


here is the wax from that.. the stone grew somewhat since then, from a 50 pointer to a 1.17 d vs2..

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Jan 16, 2012 12:44 am

and this one based on that one... these things are so much faster to develop in T-SPlines..
rinfmarq2.jpg
rinfmarq2.jpg (15.17 KiB) Viewed 468078 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Jan 22, 2012 1:46 am

bored....
Capture (Custom).JPG
Capture (Custom).JPG (47.7 KiB) Viewed 467980 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Jan 22, 2012 3:40 am

this is kind of advertising, so delete if you need to, but I figure I have given enough here to get away with a teensy bit of promotion.

my wife runsa seperate CAD entity business to mine doing Virtual Inventory, basically send her some pics she models jewelery, renders stills and/or turntables, one of our clients is live at the moment, and some pieces feature Tsplines models, feel free to browse around and if you think you could use something like this contact my wife at

caro@digital-jeweller.com

Regards
Chris


http://www.dreamdiamondstore.com/

Capture.JPG

click around and see the turntable animations etc :)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Jan 26, 2012 2:20 pm

Matt Sederberg wrote:Here's a recording of the webinar that Chris put on with us last week. Thanks again, Chris!




HA! that webinar has come back to bite me on the bum! The transcript had a bunch of my lunatic fanbase asking ridiculous questions like "Is he the Green Lantern...."

last night quite by coincidence my kids watch the movie and HAD to have a ring.. this recording of that ;)

[BROKEN VIDEO LINK: Re-Uploading this weekend]

lets hope the rumours dont start up again about my super hero secret identity ;)

FYI.. I tried this in Tspline but I am quite obviously not talented enouhg to get it right, i tried from a quadball, extruded the "beams" and tried to insert edges and tighten up the weights.. but .. well .. no go.. some stuff its jsut easier to do the good old way..

BUT..

@Juan.. dont let that stop you proving me wrong!?!?!?!?

:twisted:
Last edited by Chris Botha on Thu Feb 16, 2012 4:20 pm, edited 1 time in total.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Jan 31, 2012 9:26 pm

No time for renders folks.. stuff moving over my bench too fast now.. busy on a HUGE project with tsplines, cant say more for now, think international level ;)

in the meanwhile i did a tutorial for the new apprentice, here is the compressed version :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Nicholas North » Wed Feb 01, 2012 11:18 am

Great tutorial, Chris!

Thanks for sharing. :)
User avatar
Nicholas North
Employee
 
Posts: 965
Joined: Wed Sep 19, 2007 10:38 am
Location: Utah

Re: Chris's Stuff.

Postby JSantocono » Wed Feb 01, 2012 1:30 pm

Nice stuff Chris,
Your kids are lucky that can have a custom Green lantern Ring!
Chris Botha wrote:@Juan.. dont let that stop you proving me wrong!?!?!?!?

lol, I think I can pull it in T-Splines..., but plain Rhino sounds (and looks) much more effective.
I may give it a try...

JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby alkrever » Sun Feb 05, 2012 11:52 am

HI Chris: Thanks for the tutorial. Quick question. When you refer to F4 what do you mean? Have you applied a macro to F4? or What? (my fault of course, I must be missing something).
alkrever
Poster
 
Posts: 30
Joined: Wed Sep 02, 2009 9:03 pm

Re: Chris's Stuff.

Postby Chris Botha » Sun Feb 05, 2012 12:55 pm

Hi yes, apologies, Matrix assigns world origin 0,0,0 to the F4 key. You can set this in options, under keyboard or use whatever system you have now :)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Feb 13, 2012 4:13 am

Apologies to all with missing videos, I accidentally deleted one full page of videos (50) form youtube and am not able to restore them :(, I will upload bit by bit as possible, apologies.

this affect all posts since 19 December, once again apologies.


This ring is the completion of one of the video tutorials that got deleted too, I will try find the original file on my HD and repost the tutorial when i have some time.



[edit]
Re uploaded Tsplines Workflow of this

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Feb 16, 2012 4:15 pm

Repost of this, reuploaded video, including new finishing video. Could a moderator please go through the other posts on this page and delete the ones with broken video links :)

Tsplines Crossover Sweep, Complete Workflow.

CAD:

CAM:

BENCH+SET:
Last edited by Chris Botha on Fri Feb 17, 2012 2:40 am, edited 1 time in total.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Feb 16, 2012 7:19 pm

Another Reupload of lost videos, apologies for confusion.

CAD

Finished
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Feb 16, 2012 7:23 pm

and a new clip, some Tsplines action about halfway in :)
front.jpg

back.jpg

and cad video.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Feb 28, 2012 9:38 pm

nice little remodel.. 99% TSPIPE ;)
Capture.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby jokat » Mon Mar 05, 2012 1:46 pm

Hi Chris,
I never normally post anywhere, but I really wanted to thank you for your posting habits! You have helped me learn an enormous amount in the last year.. muchos gracias Mr B!
(A year after buying tsplines I've got my little training day on wed.. :roll: )

btw, did you ever get along with blender at all? I'm trying to find a solution to learn to model 'sculpted' forms (like a skull or a proper bumble bee or something - you know, like old fashioned clay models) and it's appealing that it is free..

Thanks again..
Gia.
jokat
Poster
 
Posts: 1
Joined: Mon Mar 05, 2012 1:36 pm

Re: Chris's Stuff.

Postby Chris Botha » Tue Mar 06, 2012 12:52 am

Hi Gia,

Your kind words appreciated :)

Blender is like Zbrush.. powerful, but you need to be "special" to understand its interface.. if you have some money laying around spare I HIGHLY recommend MODO, or if it s budget concern try Silo, Glen Southern has heaps of tutorials for Silo which translate very well for tSplines as well.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Mar 19, 2012 6:48 pm

Input images from existing crests.

Image
Image

TSAPPENDFACE:
Image

TSTHICKEN:
Image

Almost done:
Image

Finished:
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Matt Sederberg » Tue Mar 20, 2012 10:12 am

Nice, thanks for posting Chris. I got a call last evening from someone wanting to make a similar topology - will point him to this.

Matt
User avatar
Matt Sederberg
Employee
 
Posts: 1541
Joined: Wed Jul 13, 2005 11:27 am
Location: Provo, UT

Re: Chris's Stuff.

Postby Chris Botha » Wed Mar 21, 2012 2:33 pm

no worries, I should use zbrush to do the hair and final trims etc, but this a production model, not a render model, and realisticaly my milling machine cutter wont mill that super fine detail <50um, so some stuff like that i just do by hand in the wax, or in the final piece.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Mar 21, 2012 9:21 pm

this one done :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Apr 25, 2012 12:02 am

been a while, been a bit busy :)

lovely tsplines tspipe undercarriage in this one :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Wed Apr 25, 2012 8:21 am

Hi Chris, nice design man! as usual.
JuanS
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Tue Jun 19, 2012 3:06 am

platinum slide pendant for a 6.2ct diamond :)
550607_362497373816378_1654114168_n.jpg
550607_362497373816378_1654114168_n.jpg (63.62 KiB) Viewed 465257 times


and this was just for fun :)
thingmajoozit.jpg
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Rehan Sheikh » Wed Jun 27, 2012 8:11 am

Chris Botha wrote:platinum slide pendant for a 6.2ct diamond :)
550607_362497373816378_1654114168_n.jpg


and this was just for fun :)
thingmajoozit.jpg

A man who works by hand is called a laborer,
A man who works by hand and by head is called a craftsman,
and
A man who works by his hand, by his head and by his heart is called an artist.
Only those who work by heart can have fun with there tough jobs.
Rehan Sheikh
Poster
 
Posts: 7
Joined: Fri Mar 16, 2012 7:02 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Jun 28, 2012 5:27 am

Rehan.. Thank you. Kinds words from a distinguished peer are always welcome.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Jun 28, 2012 11:38 pm

the 6.2ct slide finished up



image as a frame of reference on size.

20120629_140657 (480x640).jpg
20120629_140657 (480x640).jpg (175.7 KiB) Viewed 465084 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sat Jun 30, 2012 4:52 pm

tsPipe knotwork on this Celtic and Ogham wedding band set.

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Matt Sederberg » Mon Jul 02, 2012 2:27 pm

Beautiful.
User avatar
Matt Sederberg
Employee
 
Posts: 1541
Joined: Wed Jul 13, 2005 11:27 am
Location: Provo, UT

Re: Chris's Stuff.

Postby oliviertij » Sat Jul 07, 2012 11:16 am

Hello Juan,Matt, Saskia, Knead, Chris, and the others...

Chris, be honest, how many hours do you sleep by night ?

:shock:
oliviertij
Poster
 
Posts: 176
Joined: Fri Jun 04, 2010 3:46 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Jul 08, 2012 6:50 am

:roll:

"I'll sleep when I'm dead."
- Warren Zevon (1947-2003)

untill then the world wants me to figure out more of its secrets, and I embrace that search heartily!

:D
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Jul 09, 2012 2:44 pm

the top and bottom wings and the shank blend are all :tsBridge: and :tsSkin:

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Jul 10, 2012 9:56 pm

easy money ;)

render1.jpg
render1.jpg (32.31 KiB) Viewed 464570 times

cap3.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Jul 24, 2012 3:52 am

quick clip for my apprentice 8)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Jul 25, 2012 2:45 pm

and more practice for him.. wonder if he thinks I am a chipmonk ;)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Oct 29, 2012 6:18 pm

more apprentice videos :)

been a while since i posted, apologies :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Nov 01, 2012 12:57 am

and its wax :)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Feb 13, 2013 2:41 am

Hey all.. not posted in ages, been upskilling on the bench so my CAD has kind of fallen behind, but I am having some time off with a spine operation so im stuck in bed with a laptop.... I got bored.. what can I say?.. wife says I am not allowed to make it tho.. too creepy apparently...

women...

roundabout method. free medical cad as reference, thing kinda winged it from a quadball and arrayed it....

peace out folks :)

Image
Image
Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Feb 20, 2013 7:23 am

figured I would throw this in here too. playing at rendering :) quite a few tsplines parts in the video

regards
Chris

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Mon Feb 25, 2013 10:59 pm

more render fun :) Tspline scrossover pipe ring, rendered in 5 view shades, WireFrame, Ghosted, Ice, Shaded and Vray full render.. and cross faded on my macbook.. Can you tell I am bored yet?

Thanks to Juan for helping me out on the viewport size issue ;)

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Feb 27, 2013 7:36 am



90% tsplines
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Mar 10, 2013 10:46 pm

certainly a bit different.. almost all tsplines..
Attachments
front.jpg
front.jpg (47.21 KiB) Viewed 453278 times
back.jpg
back.jpg (52.08 KiB) Viewed 453278 times
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Wed Mar 13, 2013 7:32 am

Looks great.
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Chris Botha » Fri Mar 15, 2013 8:47 pm

thanks dude :)

some simple stuff but it came up good. tstorus all the way ;)

6 minutes to draw the frame..

Image

[edit] copped some private messages about the 6 minutes.. so did a video, cannot embed, but its on my facebook.

http://www.facebook.com/photo.php?v=474745392591575
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sat Mar 16, 2013 5:46 am

Skippy.. a kangaroo ;)

Image
Image
Image

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sat Mar 16, 2013 3:04 pm

just taking the kids for a walk.. then BAM! it hits me..

T-SPLINES EVERYWHERE!!!!!

Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby JSantocono » Mon Mar 18, 2013 9:01 am

Chris Botha wrote:just taking the kids for a walk.. then BAM! it hits me..

T-SPLINES EVERYWHERE!!!!!

Image

hahaha, you are totally in!!
I feel the same!

It looks that the arquitects of the trail placed the star point on the edge to have a nice creased bifurcation! He also placed a nice T-Point at the front.
User avatar
JSantocono
Poster
 
Posts: 988
Joined: Thu Jan 03, 2008 10:18 am
Location: Argentina

Re: Chris's Stuff.

Postby Travis Serio » Mon Mar 18, 2013 2:32 pm

someone should run standardize on that sidewalk surface to avoid having the tpoint that close to the star point. :lol:
Travis Serio
Poster
 
Posts: 55
Joined: Wed Mar 24, 2010 2:14 pm

Re: Chris's Stuff.

Postby Chris Botha » Tue Mar 19, 2013 12:26 am

Travis Serio wrote:someone should run standardize on that sidewalk surface to avoid having the tpoint that close to the star point. :lol:

As I accelerate down the otherside of 40 I have often looked in the mirror and tried tsmakeuniform... usually response is "too many knots.. command failed.."
8)
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Fri Mar 22, 2013 4:07 am

Sculpting is SO not my thing.. but i did find after a half hour, engraving and driving a tablet pen are actually distant cousins, I "could" develop the skill i suppose, but I don't have clients for this outlandish type of stuff..

anyways..

90% of the base is all tslines models from the Matrix library, slapped together with SPLOP over a drape.

projected a curve, some gems and beads then off to 3dcoat..

no special settings, just import, pick up pen and GO..

all up i estimate 40 to 45 minutes work.. but dont quote me, I was trying to record and kept crashing rhino so would need to restart recording.. eventually gave up.. If i do another i will setup as tripod.. 3dcoat EATS ram..

The BIGGEST advantage to doing this in 3dCoat imo so far has been that you dont constantly need to remesh the damn thing.. voxels truly are a completely different beast, chalk and cheese to emulated voxels that other sculpting apps I have tried offer.. but you pay for it in CPU cycles..

I was going for "Crown and Brains" but my brains look a tad very Acanthus scroll.. wonder which recent skill I learned that I stole that from..



anyway.. the model will go onto GrabCad later ;)

Image
Image
Image
Image
Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sat Mar 23, 2013 5:04 am

ehh just couldn't leave it alone.. i was slammed on because it had no flowers.. lol!

Image


and a clip of the import

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Mar 24, 2013 2:00 am

My final "skull part", I think i have got the hang of mixing TSplines and 3dcoat now ;)

will be making this ring for myself :)



Image
Image
Image
Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Fri Mar 29, 2013 6:17 am

I am finding the blend of Tsplines and 3DCoat to very good! you can spend an extra hour trying to tweak a fine detail but if you treat your model as clay parts, and simply slap on parts as needed then take to 3DCoat to blend it all up is a fast satisfying result..

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Apr 03, 2013 3:34 am

some Game of thrones action ;)




Image
Image
Image
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby oliviertij » Wed Apr 03, 2013 9:48 am

Wouoooh... As usual.

I hesitated last year between 3dCoat and Topogun. I took Topogun because of the price, but when I see what you can do with 3dCoat, :cry: :cry:
Do you think I can get the same result with Sculptris, which is free ?

And just a question, please : when I see some of your videos, and screenshots, I'm thinking you work directly on a single mesh, and " distort " it. But in the 4'15" video, you select differents elements... But as I don't speak very good english, maybe I misunderstood something you wrote before... For example, I don't understand : "slapped together with SPLOP over a drape.", neither : " voxels truly are a completely different beast, chalk and cheese to emulated voxels". I beg your pardon, would you mind to get deeper in the details ?

I wanna be your little Padawan.
oliviertij
Poster
 
Posts: 176
Joined: Fri Jun 04, 2010 3:46 am

Re: Chris's Stuff.

Postby Chris Botha » Wed Apr 03, 2013 1:24 pm

Hey Oliviertjie..

I had no idea what voxels were either when i fist played with 3dcoat.. but the beauty of it is that you dont need to understand.. in the same fashion as you dont need to understand how a microwave works to heat up your sandwich.. 3dcoat can flip between voxels and polygons instantly which is the secret to its true power i feel.. you can use tools from both mindsets in the same application.. autoretopo the massive mesh back down to usable size , reimport to rhino and voila job done..

You can select seperate parts because it has layers. the fast way of seperating all your goodies onto layers is to import everything as one obj, then tick "import without voxellising", it willseperate all the meshes onto a layer each, once that is in, simply click the [S] in the voxtree to turn it into a [V] and merge the items in the tree you want joined

essential voxel are like little grains of sand, so the model cant have problems like exploding polygons, tears etc. Really jsut means clumsy oafs liek me can use it without breaking stuff. The major drawcard for me is that its interface is sane.. it looks and feels like every other normal program I own, unlike Zbrush which after three years am still no closer to figuring out.. I am glad that some people have years to try unscramble the spaghetti bowl tool system.. I however need to make money and feed my kids..

I dont sculpt directly from 3dcoat, i port my meshes, polys etc to 3dcoat then use it as a putty knife to make it all play together. rhino/tsplines is still a faster workflow to bend/warp/shift/twist the base item, then take it yuor sculpting app.. use a screwdriver to tighten screws and a hammer to hammer nails.. If i get some time I will do a clip dude.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby oliviertij » Thu Apr 04, 2013 2:50 am

What an answer !

So, I guess that will be a go idea to buy 3Dcoat...

Thanks Chris.
oliviertij
Poster
 
Posts: 176
Joined: Fri Jun 04, 2010 3:46 am

Re: Chris's Stuff.

Postby Chris Botha » Thu Apr 04, 2013 3:29 am

dont buy anything on my say so dude.. think, listen, learn, get a demo, play around with it.. what works for me may not work for you?

software is quite individual to the user and his/her own implementation of it.

i recorded a clip of porting this tspline+pipe+box nurbs to 3dcoat and then apply two decals from hieghtfields and some mesh reduction smoothing and working with layers.

its uploading, be patient.
tsp.jpg


video will be live in say 20 minutes here



hope this helps dude.
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby oliviertij » Sun Apr 07, 2013 8:03 am

:shock:

You use 3dCoat as if you created this soft... It's amazing, even if speaking english must help a little bit. You gave my name to a file, I'm proud !
Thank you for your explications ! I didn't think 3dcoat can offer so much possibilties...
oliviertij
Poster
 
Posts: 176
Joined: Fri Jun 04, 2010 3:46 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Apr 07, 2013 11:52 pm

To be honest I have not even begun to scratch the surface of what it can do.. I needed only a very few of the tools and based on those tools alone it has paid for itself already...
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun Apr 14, 2013 4:02 am

interesting examination on the retopo tool in 3dcoat. i use all the defaults, jsut "next next next through the dialogs and for an automatice tool it works quite well on some models!

Render
Image

Tspline toplogy on the seperate parts
Image

into 3dcoat for merge/retopo
Image

and back to rhino for comparison.
Image

notice it pops triangles into it, but the flow where one part merges into another is simply awesome for wizard driven retopology tool!:?!

you can grab the original exported retopomesh a=on my grabcad, its stl format but untouched otherwise, will convert back to tsplines happily.

http://grabcad.com/library/knotwork-ring
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Fri Apr 19, 2013 4:47 am

poking a stick at something here..

shaded.jpg

view1.JPG
User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Tue Apr 23, 2013 3:47 am

interesting workflow on using tspipe to setup an over n under knotwork part.

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby Chris Botha » Sun May 19, 2013 12:32 am

Using Tsplines and 3dcoat to make a signet ring.

User avatar
Chris Botha
Poster
 
Posts: 375
Joined: Thu Mar 10, 2011 5:11 am

Re: Chris's Stuff.

Postby oliviertij » Wed May 22, 2013 4:24 am

Thanks Chris !

The time you spend doing something is probably shortest than the time I spend chosing a name for a file...
:mrgreen:
oliviertij
Poster
 
Posts: 176
Joined: Fri Jun 04, 2010 3:46 am


Return to Gallery

Who is online

Users browsing this forum: RolandLoata and 2 guests

 
cron